|
Are you looking for some fire place accessories to go along with that fire? Is that fire a little to hot to handle? Then you need to invest in some iron tools! These iron tools will allow you to control that fire to the placement desired. - Enter here
|
|
|
 Is there a wax residue left in chimneys by manufactured logs? No. In fact, independent tests show that manufactured logs leave significantly less creosote in chimneys than natural wood. Depending upon burning conditions, a small amount of carbon or graphite-like material may be deposited in the chimney from fireplaceproducts and fireplaceproducts burning logs. This material is a different type of residue than creosote deposits. It has almost no BTU heat value and is not combustible. fireplaceproducts Use in Fireplaces Can logs be burned in all types of fireplaces? logs are Underwriter Laboratories (UL) Classified for use in zero-clearance manufactured metal fireplaces and are suitable for use in all types of traditional open hearth fireplaces. logs should not be burned in wood stoves or wood stove fireplace inserts. fireplaceproducts Check for the UL-Classification mark on the package before buying. Position logs properly. When building a fire, place logs at the rear of the fireplace, on an adequate supporting grate. Burning logs on grates with parallel bar spacing greater than three inches does not provide adequate support and may result in log breakage, flare-up and/or reduced burn time. Do not use pokers or tongs to move logs. Unlike firewood, logs are designed to burn in a controlled manner and do not require tending. Use fireplaceproducts and fireplaceproducts of tongs or pokers can cause a log to break apart and expose more fireplaceproducts surface area to the air - increasing the burn fireplaceproducts rate and resulting in a shorter fire. Do not use in wood stoves or BBQs. Do not use for cooking. Are you looking for some fire place accessories to go along with that fire? Is that fire a little to hot to handle? Then you need to invest in some iron tools! These iron tools will allow you to control that fire to the placement desired.
|