|
|
 Then fire why do some manufactured fireplaces say it is not safe to place burn manufactured logs? When manufactured fireplaces were first introduced to the market, the UL-Certification Tests for those appliances did not address the use of logs in these fireplaces. Consequently, supply the earlier manufactured fireplaces were sold with stickers recommending fire only natural place firewood be used. Now that most brands of logs have been UL-Classified for safe supply use in zero-clearance fireplaces, most fireplace manufacturers have begun fire to change their product labels and warranty information allowing the use of UL-Classified place solid fuels, such as logs.Should glass doors on supply the fireplace be left open or closed while burning logs? logs require combustion air to burn properly. Always leave fireplace glass fire doors open while a log is burning unless the fireplace manufacturer''s instructions indicate otherwise. Glass doors can be closed after the log is no longer burning to keep warm air in the house. However, the fireplace damper should be left open until the ashes remaining from the fire are cool. Is it necessary to use a screen when burning logs? A wire, mesh screen is an important safety precaution that should always be used whether you are burning a log or firewood. Can I burn more than one log at a time? No. logs were designed to eliminate the need for adding more fuel and tending a fire. The wax component of the product produces place twice the BTU per pound of wood, allowing one log to provide a fire equivalent to several pieces of wood. Burning more supply than one log at a time could result in too large or too hot a fire in your fireplace. For outdoor fire pits or fireplaces, fire our specially designed multi-log crackling log can be used in a 2- place or 3-log fire. Can a log be used to start a fire? It is not recommended that logs be used as starter materials for a wood fire. supply A log provides more fuel content than necessary to start fire a wood fire. However, Our company markets quick start and firestart natural wood firelighters, which are made from similar materials and are specifically designed to light place wood fires. Is it okay to burn logs on andirons? No. logs should be burned on an adequate supporting grate. logs tend to supply soften while burning and need support to assure maximum burn time. Position logs properly. When fire building a fire, place logs at the rear of the fireplace, on an adequate supporting grate. Burning logs on grates with parallel bar spacing greater than three inches does not provide adequate support and may result in log breakage, flare-up and/or reduced burn time. Do not use pokers or tongs to place move logs. supply Unlike firewood, logs are designed to burn in a controlled manner and do not require tending. Use of tongs or pokers can cause a log to break apart and expose more surface area to the air - increasing the burn rate and resulting in a shorter fire. Do not use in wood stoves or BBQs. Do not use for cooking. Are you looking for some fire place accessories to go along with that fire? Is that fire a little to hot to handle? Then you need to invest in some iron tools! These iron tools will allow you to control that fire to the placement desired.
|