fire lighting

Are you looking for some fire place accessories to go along with that fire? Is that fire a little to hot to handle? Then you need to invest in some iron tools! These iron tools will allow you to control that fire to the placement desired. - Look here

Is there fire a wax residue left in chimneys by manufactured logs? No. In fact, independent tests show that manufactured logs lighting leave significantly less creosote fire in chimneys than natural wood. Depending upon burning conditions, a small amount of carbon or graphite-like material may be deposited in the chimney from burning logs. This material is a different type of residue than creosote lighting deposits. It has almost no BTU fire heat value and is not combustible. Use in Fireplaces Can logs be burned in all types of fireplaces? logs are Underwriter Laboratories (UL) Classified for use in zero-clearance manufactured metal fireplaces and are suitable for use in all types of traditional open hearth lighting fireplaces. logs should not be burned in wood stoves or wood stove fireplace inserts. Check for the UL-Classification mark on the package before buying.

Then why do some manufactured fireplaces say it is fire not safe to burn manufactured logs? When manufactured fireplaces were first lighting introduced to the market, the UL-Certification Tests for those appliances did not address the use of logs in these fireplaces. Consequently, the earlier manufactured fireplaces were sold with stickers recommending only natural firewood be used. Now that most brands of logs have been UL-Classified for safe use in zero-clearance fireplaces, most fireplace manufacturers fire have begun to change lighting their product labels and warranty information allowing the use of UL-Classified solid fuels, such as logs.Should fire glass doors on the fireplace be left open or closed while burning logs? logs require combustion air to burn properly. Always leave fireplace glass doors open while a log is burning unless the fireplace manufacturer''s instructions indicate otherwise. Glass doors can be closed after the log is no longer burning to keep warm air in the house. However, the fireplace damper should be left open until the ashes remaining from the fire are cool.

Is it necessary to use a screen when burning logs? A wire, mesh screen is an important safety precaution that should always be used whether you are burning a log or firewood. Can I burn more lighting than one log at a time? No. logs were designed to eliminate the need for adding more fuel and tending a fire. The wax component of the product produces twice the BTU per pound of wood, allowing one log to provide a fire equivalent fire to several pieces of wood. Burning more than one log at a time could result in too large or too hot a fire in your fireplace. For outdoor fire pits or fireplaces, our specially designed multi-log crackling log can be used in a 2- or 3-log fire. lighting Can a log be used to start a fire? It is not recommended fire that logs be used as lighting starter materials for a wood fire. A log provides more fuel content than necessary to start a wood fire. However, Our company markets quick start and firestart natural wood firelighters, which are made from similar materials and are specifically designed to light wood fires. Is it okay to burn logs on andirons? No. logs should be burned on an adequate supporting grate. logs tend to soften while burning and need support to assure fire maximum lighting burn time.

Are you looking for some fire place accessories to go along with that fire? Is that fire a little to hot to handle? Then you need to invest in some iron tools! These iron tools will allow you to control that fire to the placement desired.